If you love innovative plant displays, you’ll want to check out The Rail Version 2, a 3D printed wall-mounted planter system designed by Brian Hendricks. Building on the success of the original, this new version is smarter, easier to install, and even more beautiful in any space. After living with the original Rail in his studio and home for a year, Hendricks took his experience and feedback to heart and made some thoughtful improvements.
One of the biggest upgrades in The Rail Version 2 is the elimination of set screws. In the first design, brackets and attachments were held to the dowel with printed set screws. Now, the design is completely screw-free, which means it prints faster, installs more easily, and has a cleaner, more streamlined look. The top and bottom brackets now have closed ends that firmly sandwich the dowel, while the sliding dovetail attachment is secured with a small wedge that you simply insert from the bottom.
Designer: Brian Hendricks
This new dovetail system comes in two sizes. The larger size fits all of Brian’s large wall-mounted planters and also works with the small size, provided it uses the new under-mount drip tray. If you’re using a small planter from the original design, just stick with the small dovetail attachment for a perfect fit.
Mounting The Rail Version 2 to your wall is straightforward. First, slide the dovetail attachments onto the dowel and insert the wedge from the bottom, using a flat head screwdriver to secure it tightly. Next, place the top and bottom wall mounts on the ends of the rail. Insert the included keyhole markers into the slots on the wall mounts and press the rail against the wall where you want it. The markers will leave an indent, showing you exactly where to drill. Use a 3/16″ drill bit for the holes, then insert wall anchors and screws (#8 – #10 x 1″ screws and anchors work best). The screw heads should stick out just enough to fit snugly into the keyholes—use the included depth gauge for accuracy. Attach the rail to the wall and slide your planters onto the attachments. For best results, supports are recommended for the flat overhang on the back of the planters.
When it comes to printing, everything is designed to print upright with the flat bottom on the build plate. It’s important to note that The Rail Version 2 cannot be scaled, since the keyhole slots are specifically sized for standard hardware. This ensures a secure fit every time and a worry-free installation. With these improvements, The Rail Version 2 is a fantastic choice for anyone looking to add a little green to their walls. It’s clean, customizable, and practical—whether you’re a plant lover, design enthusiast, or just want an easy way to brighten up your space.
The post The Rail V2 is a 3D printed wall-mounted planter system that’s now smarter and easier to use first appeared on Yanko Design.